Light steel structure shed building for Angola
Steel structure building is widely used as workshop, warehouse, factory, prefabricated house, hotel, church, garage, etc. It is durable, economic and environmentally friendly.
| Item |
light steel structure shed building for Angola |
| Model |
Single slope, double slope, multi slope. Single span, double-span, Multi-span Single floors, Double floors |
| Main steel grade |
Q235B, Q345B |
| Column & Beam |
Welded or Hot rolled H-section steel, constant cross-section or variable cross-section. H 160~2000*150~800*6/8/10*6/8/10/12mm. Two coats of primer and finish paint. |
| Wall & Roof |
EPS, Fiber glass, Rockwool, PU sandwich panel 50/75/100mm, and corrugated steel sheet 0.5~0.8 mm |
| Wall & Roof purlin |
C / Z channel steel, Hot dip galvanized. C80~C300, Z100~Z300 |
| Bracing |
X or V type Steel round bar, Angle steel and tubes, painted or galvanized. |
| Strut |
Steel round pipe and tube, and angle steel, painted. |
| Sag rod |
Steel round bar, galvanized. |
| Eave Gutter |
Galvanized / Stainless steel sheet |
| Downspout |
UPVC pipe Diameter 110mm |
| Trim & Flashing |
Bended color steel sheet |
| Door |
Roll-up, Sliding, Lifting and Hinged door etc |
| Window |
Plastic steel, Aluminum alloy window etc |
| Canopy |
Color corrugated steel sheet, Sandwich panel |
| Skylight |
Polycarbonate sheet 0.8/1.2mm |
| Roof ventilation |
Monitor or natural ventilator |
| Bolt |
Foundation anchor bolt 10.9S 8.8S, Commercial bolt 4.8S, Expansion bolt. |
| Accessories |
Screw, Rivet, Foam closures, Sealant, Ventilator, etc |
This is used as feed mill shed,with the area of 800 m2 and located in Angola. The prefab warehouse shed has a special offload area . All the components are prefabricated before leaving factory and the materials are light steel structure. The steel shed features light weight,easy installation,water and fire proof,fast construction,low cost ,recyclable and environment-protection
Main steel structure frame of prefab warehouse shed
1 H/C section steel columns,beams and wind-proof columns with welded and hot dip galvanized
2,with treatment of one time red-oxide primer painting and two times grey facing painting
Secondary steel part of steel warehouse
1 Roof& Wall H/C purlin with welded and hot dip galvanized
2 Tie bar : Φ89*3.0
3 Roof support support between column:Φ20
4 Bracing bar:Φ12
5,Knee bracing: angle steel
Roof a& wall maintenance of steel shed
1 roof & wall corrugated single steel sheet :0.3mm-0.6mm
2 roof & wall sandwich panel insulated with EPS foam:50mm
- Transparent sheet:(FRP),1.0mm-2.0mm
- Flashings:made by color-coated corrugated steel sheet
Window& door
1,window: louver
2,door:swing door 50mm EPS sandwich panel
Fasteners
High strength bolt,common bolt and nut. Self-tapping screws,foundation bolt,etc
Our past projects
| Item Name |
Materials Characteristics |
Material Grade |
Surface Treatment |
| Steel Column |
H shape,Box,Steel Pipe,Hot tolled sheet |
Q235B,Q345B |
Paint or Hot dip Galvanized |
| Steel beam |
H shape,Box,Steel Pipe,Hot tolled sheet |
Q235B,Q345B |
Paint or Hot dip Galvanized |
| Steel Bracing |
Steel Rod,Steel Pipe,Angle Steel |
Q235B,Q345B |
Paint or Hot dip Galvanized |
| Steel Purlin |
C or Z purlins(Thickness1.8mm~3.0mm) |
Q235B,Q345B |
Hot dip Galvanized |
| External Wall panels,Roof panels |
Single colorful corrugate steel sheet,sandwich panels with EPS,Rock wool,PU. |
Galvanized Steel+Painting |
Alu-zin 150g,Fluorocarbon pain |
| Steel buildings Door |
Slidding or Rolling door |
Steel or Aluminum sheet |
Paint or Hot dip galvanized |
| Steel buildings Windows |
Aluminum alloy-Glass,Aluminum alloy-shutter |
T=1.0-2.0mm |
Alloy |
| Skylighting panels |
FRP T=1.5mm-1.8mm |
Coefficient of thermal expansion:2.2x10-5/cm |
Light Tranmitar 85% |
| Ventilator |
Turbine ventilator on a ridge |
Steel,Stainless steel ,PC |
Paint or Hot dip Galvanized |
| Gutter |
Galvanized steel plate,Stainless steel plate |
T=2.0mm |
Hot dip galvanized |
| Downpipe |
PVC pipe,color steelpipe Y=0.5mm |
Dia110mm |
paint |
| Hight Bolt |
Ordinary ,High strength |
10.9S,4.8S |
Hot dip galvanized,Steel |
| Ground bolts |
Steel RodM24,M27,M30,M33,M39,M42 |
10.9S |
Steel |
.
Production flow:
Container loading:
Pre assemble before loading
Product Description
Steel Structure Workshop:
1) Different sizes:
MOQ is 100m2, width X length X eave height.
2) Different types:
Single slope;
double slope;
Sing span;
double-span;
Multi-span;
single floor, double floors.
3) Different Bases:
Cement and steel foundation bolts.
4) Different Columns and Beams:
Material Q345(S355JR) or Q235(S235JR) steel, all bolt connections, Straight cross-section or Variable cross-section.
5) Different bracings:
X-type or V-type or other type bracing made from angle, round pipe, etc.
6) Different Purlins:
C or Z type: Size from C120~C320, Z100~Z200.
7) Different Roof and Wall Panel:
Single colorful corrugated steel sheet 0.326~0.8mm thick, (1150mm wide) or sandwich panel with EPS, ROCK WOOL, PU insulation thickness around 50mm~100mm.
8) All accessories:
Semi-transparent skylight belts, Ventilators, down pipe, Galvanized gutter, etc.
9) Surface:
Two lays of Anti-Rust Paint or galvanized.
10) Packing:
Main steel frame without packing load in 40'OT, roof and wall panel load in 40'HQ.
ONLY need you to provide us with the following information:
Design Parameters:
1) Live load on roof (KN/M2);
2) Wind speed (KM/H);
3) Snow load (KG/M2) - If Applicable;
4) Earthquake load - If Applicable;
5) Style of Doors and Windows;
6) Crane (if you have), Crane span, Crane lift height, max lift capacity, max wheel pressure and min wheel pressure;
7) Size: width X length X eave height, roof slope;
8) Or your idea!
BUT maybe you are unsure about what type or what needs you have regarding you're warehouse/workshop, or this project is your first one. Don't worry, we will teach you to choose the right style and the finest design within your budget.
FAQ
1. Q: Order process?
A: Design - contract- engineer - fabricate- deliver - erect
2. Q: Payment term?
A: T/T - 30% deposit in advance, 70% balance before shipment. Or L/C At sight.
3. Q: What is the delivery time?
A: Generally speaking, the delivery time will be within 25 - 40 days, according to the complexity of the fabrication.
4. Q: How to package and deliver?
A: Package on steel pallet and deliver by 40ft HQ Shipping containers.
5. Q: How to install?
A: We will provide construction and detailing drawing and installation manual to help the installation work. If customers need, will dispatch professional engineers and skilled workers to site assist.
){kind=link}