| Customization: | Available |
|---|---|
| Connection Form: | Bolt Connection |
| Main Steel Frame: | H Steel, Z or C Purlin |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Chicken House
Main Structure
(Steel tube truss system ) we adaopt hot-dip galvanized C section or steel tube truss beam to reduce sef-weight of design load and dosage of thesteel. At the same time, hot-diped galvanized can widely improve anti-corrosion of the steel. (The construction cycle of the steel structure work is short, which reduces the cost of the project effectively. The steel structure has strong shock resistance and can improve the comprehensive anti-seismic property of the whole house).
Substructure( Cold-formed thin-walled steel)
Roof purlin uses the hot-dip galvanized Z or C section. The way to continuous lap makes the steel frame as a whole. Wall purlin uses the hot-dip galvanized C section steel. All components adopt bolted connection, no welding, which makes the structure overall appearance smooth.
Characteristics
1.rust protection, acid resistance, good insulation performance.
2.easy structure, high efficiency, lower cost, great flexibility.
3.wind protection, lighting and shock protection,environment friendly.
Automatic equipment show
1.Main feed line system
2.Pan feeding system
3.Nipple drinking system
4.Ventilation system
5.Cooling pad system
6.Spraying system
7.Heating system
8.Environment control system
I. Poultry equipment description
1. Main feed Ddelivery line
(1. )Main feed delivery system is a complete set of automatic feeding system, included a material conveying pipe, silo, auger, drive motor and a feed level sensor.
(2) Main Feed line is mainly used to deliver feed from silo to the hopper in the poultry house. There is one feed sensor at the end of main feed line, which can control the drive motor on and off to realize automatically feeding.
Different specifications of silos are alternative to choose according to the daily consumption.
2. Automatic pan feeding line system
There is a sensor at each feeding line which controls motor on and off to achieve automatically feed delivery.
The motor will start working and deliver feed when the feed pan (with sensor)
lacks feed and will stop working when the feed pan (with sensor) is full of feed.
3. Automatic nipple drinking line system
This system can provide fresh and clean water for poultry which is crucial for the growth of Poultry.
The drinkers can be triggered from 360 degree which helps young birds start well and makes drinking easier.
4. Cooling pad system
Evaporative cooling pad system works in the condition of negative pressure, the cooling pad is installed on one side of the wall, fan installed other side. When air flow through cooling pads, the water evaporation absorbs a lot amount of heat.
The height of cooling pad is 1.5-2.2m, the area of cooling pad in chicken house is about 6-8 times than the fans.
5. Ventilating system
The main parts of ventilation system is the big fan and small fan. They are controlled by the control system. The NO. of the fans to run was decided by the temperature of the poultry house.
About 200m2 need 1 big fan and 15-20m need a small fan, this is the standard to design the quantity of fans in chicken house.
Chicken House whole view
Inside photos automatic feeding and drinking system:
The function of deliver system is to transmit the feed outside shed to the hopper of feeding system inside, control system indicates delivery system to work automatically.
Feed of poultry raising farm is stored in the silo, so as to save large amount of package, and also to ensure the health of feed. Different specifications of silos are alternative to choose according to the daily consumption and the size of silo. Material of silo consist of galvanized sheet and glass fiber reinforced plastic.
About this project, 20000 broiler chickens, we can choose 5.4t
Cooling pad system
Evaporative cooling pad system works in the condition of negative pressure, the cooling pad is installed on one side of the wall, fan installed other side. When air flow through cooling pads, the water evaporation absorbs a lot amount of heat.
The height of cooling pad is 1.5-2.2m, length about 3m, the area of cooling pad in chicken house is about 6-8 times than the fans.
ventilating system
The main parts of ventilation system is the big fan and small fan. They are controlled by the control system. The NO. of the fans to run was decided by the temperature of the poultry house.
About 200m2 need 1 big fan and 15-20m need a small fan, this is the standard to design the quantity of fans in chicken house.
We can provide the quotation , if you confirm the information as bellow
*Wind speed(KM/H)
*Snow load (KG/M2)
*Rain load (KG/M2)
*Earthquake load if have
*Demands for doors and windows
*Crane (if have) ,Crane span, crane lift height, max lift capacity, max wheel pressureand min wheel pressure!
Industrial Warehouse (5000 M2 )-Argentina
Warehouse (900M2)---- Republic of Uzbekistan
Workshop (7800M2)----Germany
Warehouse(3600M2)---Romania
Poultry house(2500M2)---- Angola
Pre engineered building(3500M2)---Pakistan
Steel workshop(2800M2)-South Africa
Aircraft Hangar(1300M2)------Australia
Warehouse(900M2)---- Mongolia
Prefabricated house(70M2)----800 sets---Sudan
Container house(20')-----60 sets-Mozambique
Steel structure shed for cement(3600m2)- Tanzania
Steel structure workshop for furniture (10000m2)- Costa rica
Steel structure workshop building with mezzanine for pet food (800m2)- Bolivia
Steel structure workshop building for pet food (2000m2)-Thailand
Steel structure building with crane (1500m2)- Cezch.
Steel structure warehouse with crane (700m2)- Papua New Guinea.
Steel structure workshop for car showroom (3000m2)- Ethiopia
Steel structure workshop hall (1200m2)- Algeria
Steel structure storage warehouse (900m2)- Uruguay
Steel structures for poultry shed(630m2)-18sets- Malawi
Workshop View and production line
| Offer request | ||||
| Type of Building | ||||
| Please state type of building, ie: workshop, warehouse, hall, hangar, farm, roof structure or other construction | ||||
| Dimension | a(width) | b(length) | h1(wall height) | h2(total height) |
| Construction Site | ||||
| Roofing and Walls | (1)sandwich panel (2)profile steel sheets (3)steel sheet+glass wool blanket (4) no walls-only roof with structures |
|||
| Contact Name | ||||
| Company Name | ||||
| Phone Number | ||||
| Additional info | ||||
| Send us sketches, drawings or the project, if you have | ||||
){kind=link}